Smart pressure transmitter APC-2000ALW

Specifications
Max. Betriebsdruck GW 500 A4 600 mbar (60 kPa)
Pressure connection p+: centrally on underside of housing, G 1/4 internal thread to ISO 228: Gas or air
Special version: additional G 1/4 internal thread at side
Temperature range Ambient temperature -15 °C to +70 °C
Medium temperature -15 °C to +70 °C
Storage temperature -30 °C to +80 °C
Materials GW…A4
Housing lower section aluminium die casting
Switch Polycarbonat
Switching contact Standard: Silber (Ag)
Optional: gold-plated (Au) silver, suitable for
DDC applications: DC 24 V; 0.02 A
Diaphragm NBR
Hood polycarbonate
GW…A4
Housing lower section aluminium die casting
Switch Polycarbonat
Switching contact Standard: Silber (Ag)
Optional: gold-plated (Au) silver, suitable for
DDC applications: DC 24 V; 0.02 A
Diaphragm NBR
Hood Extrusion cast zinc, powder-coated
Switching voltage Ag contact AC eff. min. 24 V max. 250 V
DC min. 24 V max. 48 V
Au contact DC min. 5 V max. 24 V
Nominal current Ag contact AC eff. 10 A
Au contact DC 20 mA
Switching current Ag contact AC eff. min. 20 mA max. 6 A with cos ϕ 1
AC eff. max. 3 A with cos ϕ 0,6
DC min. 20 mA max. 1 A
Au contact DC min. 5 mA max. 20 mA
Electrical connection Plug connection for line sockets as per
DIN EN 175 301-803, 3-pin with protection contact
Degree of protection GW…A4 IP 54 to IEC 529 (EN 60529), (clear hood)
GW…A4/2 IP 65 as per IEC 529 (EN 60529), (metal housing)
Adjustment With rising pressure and installed in a vertical position.
Optional rising or dropping pressure adjustment on-site possible.
Note switch point change if installation position changes.
Setting tolerance ±15 % switch point deviation based on the setpoint and with unit installed in a
vertical position